Sahinler bending plate machine MRM H 2050

Rp. CALL

Last Updated

21 Sep 2021

Country Origin

Turkey

Minimum Order

1 kg

Specification of Sahinler bending plate machine MRM H 2050

Sahinler bending plate machine MRM H 2050

The bending machine is used for work by applying pressure to certain parts so that plastic deformation occurs at the pressure. While the bending process is a process of bending or bending using a manual bending tool or using a bending machine. Bending work is usually done on low carbon steel sheet material to produce plate material.

Without Pre-Bending, flat plate ends may remain depending on diameter.
MODEL	Usefull length	Pre-Bending Capacity	Bending Capacity	Top and bottom roll dia.	Back rolls diameter	Min. roll dia.	Motor Power	Working speed	Machine Dimensions (LxWxH)	Weight
	mm	mm	mm	mm	mm	mm (x1,5/x5)	kW	m/min.(dk.)	mm	kg
MRM-H 650x80	650	2,5/3	3/3,5	80	80	120/400	1,1+0,75	5	1950x750x960	800
MRM-H 1050x80	1050	1,5/2	2/2,5	80	80	120/400	1,1+0,75	5	2350x750x960	920
MRM-H 1050x100	1050	2/2,5	2,5/3	100	90	150/500	1,1+0,75	5	2350x750x960	1120
MRM-H 1050x130	1050	2,5/3	3/5	130	130	195/650	2,2+1,1	5	2350x950x1110	1720
MRM-H 1270x80	1270	1/1,5	1,5/2	80	80	120/400	1,1+0,75	5	2570x750x960	950
MRM-H 1270x100	1270	1,5/2	2/3	100	90	150/450	1,1+0,75	6,5	2570x750x960	1150
MRM-H 1270x130	1270	3/4	4/5	130	130	195/650	2,2+1,1	5	3020x950x1110	1750
MRM-H 1270x150	1270	4/5	5/7	150	130	225/750	2,2+1,1	6	3020x950x1110	1825
MRM-H 1270x180	1270	5,5/7,5	7,5/10	180	150	270/900	4,0+1,1	5	3070x1150x1290	2100
MRM-H 1270x200	1270	8/10	10/12	200	180	300/1000	4,0+1,5	6	3070x1150x1290	2200
MRM-H 1550x80	1550	0,5/1	1/1,5	80	80	120/400	1,1+075	5	2850x750x960	1100
MRM-H 1550x100	1550	1/1,5	1,5/2	100	90	150/450	1,1+0,75	6,5	2850x750x960	1200
MRM-H 1550x130	1550	2,5/3,5	3,5/4,5	130	130	195/650	2,2+1,1	5	3300x950x1110	1850
MRM-H 1550x150	1550	3,5/4,5	4,5/6,5	150	130	225/750	2,2+1,1	6	3300x950x1110	2000
MRM-H 1550x180	1550	5/7	7/9	180	150	270/900	4,0+1,1	5	3350x1100x1290	2310
MRM-H 1550x200	1550	7/9	9/11	200	180	300/1000	4,0+1,5	6	3350x1100x1290	2450
MRM-H 1550x220	1550	8/10	10/12	220	180	330/1100	5,5+1,5	5	3500x1200x1370	3250
MRM-H 1550x250	1550	10/12	12/15	250	200	375/1250	7,5+1,5	5	3500x1200x1370	3600
MRM-H 2050x130	2050	2/3	3/4	130	130	195/650	2,2+1,1	5	3800x950x1110	2050
MRM-H 2050x150	2050	3/4	4/6	150	130	225/750	2,2+1,1	6	3800x950x1110	2250
MRM-H 2050x180	2050	4/6	6/8	180	150	270/900	4,0+1,1	5	3850x1100x1290	2690
MRM-H 2050x200	2050	6/8	8/10	200	180	300/1000	4,0+1,5	6	3850x1100x1290	2950
MRM-H 2050x220	2050	7/9	9/11	220	180	330/1100	5,5+1,5	5	4000x1200x1370	3750
MRM-H 2050x250	2050	8/10	10/12	250	200	375/1250	7,5+1,5	5	4000x1200x1370	4200
MRM-H 2550x150	2550	2/3	3/4	150	130	225/750	2,2+1,1	6	4300x950x1110	2500
MRM-H 2550x180	2550	3/4	4/6	180	150	270/900	4,0+1,1	5	4350x1100x1290	3070
MRM-H 2550x200	2550	4/6	6/8	200	180	300/1000	4,0+1,5	6	4350x1100x1290	3450
MRM-H 2550x220	2550	5/7	7/9	220	180	330/1100	5,5+1,5	5	4500x1200x1370	4250
MRM-H 2550x250	2550	6/8	8/10	250	200	375/1250	7,5+1,5	5	4500x1200x1370	4800
MRM-H 3100x180	3100	2/3	3/4	180	150	270/900	4,0+1,1	5	4850x1100x1290	3450
MRM-H 3100x200	3100	3/4	4/6	200	180	300/1000	4,0+1,5	6	4850x1100x1290	3950
MRM-H 3100x220	3100	4/6	6/8	220	180	330/1100	5,5+1,5	5	5000x1200x1370	4750
MRM-H 3100x250	3100	5/7	7/9	250	200	375/1250	7,5+1,5	5	5000x1200x1370	5400
MRM-H 4050x250	40/50	3/4	4/6	250	200	375/1250	7,5+1,5	5	6000x1200x1370	6600
Minimum diameter top roll Ø x 1,5 times / * Plate bending capacities are given for 260 N/mm² plate yielding strength.