BEVEL machine PROMOTECH PRO 2 PB
Bevel is a side of the plate with beveled edges. The term bevel refers to pieces made at an angle of less than 90 degrees. This machine tool is commonly used for penetration of a welding. The bevel forms angles which to facilitate and produce good welding. Manufacturers / welders often use this technique for welding quality.
Technical specification |
PRO 2 PB
with air motor |
PRO 2 PB
with electric motor |
PRO 2 PB
with battery motor |
|---|
Air motor |
Modec NT10RT0851FCA1F-CO |
- |
- |
Air requirement |
0.6 MPa (87 psi) |
- |
- |
Air consumption |
1400 l/min (50 CFM) |
- |
- |
Voltage |
- |
1~ 220–240 V, 50–60 Hz |
18 V DC, 5.2 Ah |
Electric motor |
- |
Metabo
SBEV 1100-2 S |
Metabo
BS 18 LTX Impuls |
Power |
800 W |
1100 W |
- |
Connection |
CEJN 410 DN 10.4 R 1/2’’ BSPT fitting for quick-coupling |
Electrical plug |
Battery connection |
Rotational speed without load |
210 rpm |
10–134 rpm (gear 1)
30–377 rpm (gear 2) |
10–60 rpm (gear 1)
30–205 rpm (gear 2)
|
Rotational speed (nominal) |
105 rpm |
10–134 rpm (gear 1)
30–377 rpm (gear 2) |
10–60 rpm (gear 1)
30–205 rpm (gear 2) |
Pipe diameter |
18 mm ID–48 mm OD
12.5 mm ID–25 mm OD*
42 mm ID–60.3 mm OD** |
18 mm ID–48 mm OD
12.5 mm ID–25 mm OD*
42 mm ID–60.3 mm OD** |
18 mm ID–48 mm OD
12.5 mm ID–25 mm OD*
42 mm ID–60.3 mm OD** |
Maximum pipe wall thickness |
8 mm
3.5 mm |
8 mm
3.5 mm |
8 mm
3.5 mm |
Weight with motor |
7.6 kg (17 lbs) |
7.4 kg (16.5 lbs) |
6.5 kg (14.5 lbs), includes battery |