BEVEL MACHINE PROMOTECH PRO 40 PBS
Bevel is a side of the plate with beveled edges. The term bevel refers to pieces made at an angle of less than 90 degrees. This machine tool is commonly used for penetration of a welding. The bevel forms angles which to facilitate and produce good welding. Manufacturers / welders often use this technique for welding quality.
PRO-40 PBS
Stationary Pipe Bevelling Machine
1~ 208 – 230 V, 50/60 Hz
3~ 208 – 230 V, 50/60 Hz
200 - 1000mm (8”– 40”) for pipes longer than 830mm;
200 – 600 mm (8”– 23-5/8”) for pipes of 400-830mm length;
6 000 kg (13 200 lbs) for plastic rollers of active support (standard);
10 000 kg (22 000 lbs), if active support is equipped with optional steel rollers;
5 mm (3/16’’)
mechanical with chain
100-1100 mm/min
0-60° or -60° to 0° (option)
with continuous angle adjustment
45 mm (1-3/4”)
5mm (1/4”) standard; up to 20mm (“13/16) - option
YES
0.24“ / 6 mm or 0.31“ / 8 mm
Power supply
External pipe diameter range
Maximum allowed pipe weight
Minimum pipe wall thickness
Pipe fixing
Feed rate
Beveling angle range
Max OD bevel width
Max ID bevel width
Beveling type „J”
„J” type beveling radius