Specification of BEVEL MACHINE PROMOTECH ABM 14
BEVEL MACHINE PROMOTECH ABM 14
Bevel is a side of the plate with beveled edges. The term bevel refers to pieces made at an angle of less than 90 degrees. This machine tool is commonly used for penetration of a welding. The bevel forms angles which to facilitate and produce good welding. Manufacturers / welders often use this technique for welding quality.
Voltage |
3~ 400 V + PE, 50/60 Hz |
Power |
2200 W |
Spindle speed |
9 rpm |
Bevel angle range
(ß – depending on angle device in use) |
30°
22.5°, 25°, 35°, 37.5°, 45° (options) |
Bevel width (b) |
up to 14 mm (9/16’’) |
Maximum bevel in one single run |
12 mm (in 40 Kg/ 392 MPa carbon steel) |
Minimum plate thickness |
6 mm (1/4’’) |
Maximum plate thickness |
40 mm (1-9/16’’) |
Minimum plate width |
55 mm (2-3/16’’) |
Bevel length per minute |
2.6 m (8.5 ft) |
Minimum pipe ID |
100 mm (4”) |
Weight |
65 kg (144 lbs) |